This electrical risk assessment covers all operations related to electrical LV, MV inspection and testing. Related hazards include: Electrocution Electric Burn Fire Explosion Control Measures 5 Golden Rules to avoid accidents due to electricity: 1. Disconnect completely ( the apparatus on which you are to work) Live work is too avoided at all times (as… Read More: Risk Assessment for Electrical Work Up To 415 Volts »
This is basic risk assessment that is applicable for the use of hammer, screw drivers, knifes, hammers, snips, measuring tape etc. Hazards may include: Hand Injury Face/Eye Injury Foot Injury Injury to other parts of the body Control Measures Selecting the right tool for the job minimizes the risk of having an accident. Avoid using hand… Read More: Hand Tools Risk Assessment »
Below is work at height risk assessment that covers work in any place including at or below ground level and/or obtaining access to a place of work where an employee could fall a distance liable to cause injury. Scope of work may include work at or below ground level – roofs, open edges, opes, risers,… Read More: Work at Height Risk Assessment »
This risk assessment is applicable for all persons involved in transporting or supporting of a load by 1 or more employees and includes lifting, putting down, pulling, pushing, carrying or moving a load, which, by reason of its characteristics or of unfavorable ergonomic conditions, involves risks, particularly of back injuries to employees. Scope of this… Read More: Manual Handling Risk Assessment and Control Measures »
This risk assessment is applicable for all kind of operations including the use of tools and equipment’s. Scope of the document is all locations including sites, offices, stores, workshops, canteens, dry rooms, toilets etc. For all type of work activities at the same level within the working environment including platforms. Hazards include: Cuts and Abrasions Laceration Serious bodily… Read More: Slips, Trips and Falls Risk Assessment »
All workers to attend safety induction conducted by main contractor and specific training on the safe installation methods. Install HV Panels as indicated on the approved shop drawing and as per specification and according to manufacturer’s recommendation. Site Engineer and Site Supervisor will give necessary instructions to tradesmen (electrical technician) and provide necessary approved construction/shop… Read More: Electrical Installation Method Statement for HV Panels »